Search
You can find the results of your search below.
Matching pagenames:
Fulltext results:
- how_to_measure_the_instrument_response_function_irf @howto
- e you need to record the IRF. * Good luck with IRF measurements. Do not expect high count rates, but IRF must be recorded at much lower (than fluorescence... sers are used which have fs-pulses, therefore the IRF is normally determined by the detector. In these cases, often the IRF can be measured once (and the excitation waveleng... of the excitation wavelength, the position of the IRF can shift slightly, but this is accounted for with the "IRF-shift"-parameter of the fitting equation. ===== How to compensate IRF effects in the analysis of time domain measuremen
- how_to_work_with_the_instrument_response_function_irf @howto
- . Therefore, highlight the file with the measured IRF (single mouse click on the .ptu-file)\\ An example measured IRF can be found in Tutorials workspace [[https://fig... ck o.k. * Decays with quenched components for IRF-measurments as described here can also be used for IRF-fitting without time gating. However, as these de... timegate.png?800 |}} 6. Click on “Export Decay as IRF”. Rename the file accordingly. The IRF can now be used for the fitting. **Note:** ... em is the FWHM (full width of half maximum) of an IRF-measurement. For PicoQuant systems it´s usually i
- flim_fret_calculation_for_multi_exponential_donors @howto
- C window. * The new fitting parameters "Shift IRF" and "Bkgr IRF" (=background IRF) appear in the fitting parameter table. {{ :howto... ey in the TCSPC window. * Activate the imported IRF by selecting the IRF file in the IRF drop down menu. {{ flim-fret-calculation_for_mult... estimation of the instrument response function (=IRF) is shown. The IRF reconstruction is deducted from the rising edge o... donors_Image_35.png }} * Activate the imported IRF by choosing it in the IRF option (if not shown automatically). {{ flim-fret
- lifetime-fitting_using_the_flim_script @howto
- TCSPC window.\\ The new fitting parameters "Shift IRF" and "Bkgr IRF" (=background IRF) appear in the fitting parameter table.\\ **Note... individual lifetime components, Bkgr(Decay), Bkgr(IRF) and Shift(IRF) in order to fix these values, IRF and Background. Then in the pixel-by-pixel fit, t
- visualizing_dynamics_using_the_multiframe-flim_script @howto
- TCSPC window.\\ The new fitting parameters "Shift IRF" and "Bkgr IRF" (=background IRF) appear in the fitting parameter table.\\ **Note... been dropped gradually about 500ps.\\ * If an IRF has been measured, the fits can also be performed using the measured IRFs. You need to import your measured IRF for the re... how_to_work_with_the_instrument_response_function_irf|How to Work with Instrument Response Functions (IRFs) Measured with a Microscope]]. \\ * Click o
- lifetime_fitting_using_the_flim_analysis @howto
- C window. * The new fitting parameters "Shift IRF" and "Bkgr IRF" (=background IRF) appear in the fitting parameter table. **Note:*... PC window, therefore we fix the parameters "Shift IRF" and "Bkgr IRF". This is practically always valid. In case of an IRF estimated from the decay like here, these parameters can also be set to 0, as the IRF was derived from the decay. * As we can see f
- novaflim_calculated_irf @faq
- ====== NovaFLIM Calculated IRF ====== {{tag> faq software novaflim IRF}} In the Nova Flim the IRF is parameterized as a combination of two Gaussian curves (a total of 5 fi... usted during Initial Fit. Roughly speaking, the IRF (Instrument Response Function) can be approximate
- irf @glossary
- ====== IRF ====== IRF stands for **I**nstrument **R**esponse **F**unction. The IRF is the best approximation to a temporally infinitely short process possible to m... the 'real' decay with the IRF. see also [[howto:how_to_measure_the_instrument_response_function_irf|How To Measure the IRF]]
- differential_count_rate @glossary
- that exhibit count rate dependent shifting of the IRF, extra care has to be taken when measuring the IRF and directly using it for decay analysis. ((Takuh
- lifetime_fitting_using_the_tcpsc_fitting_script @howto
- C window. * The new fitting parameters "Shift IRF" and "Bkgr IRF" (=background IRF) appear in the fitting parameter table. {{ lifeti... urve, the estimated instrument response function (IRF) and the fitted curve. {{ lifetime_fitting_using... . For illustration, mark the two files ''Cy5_diff_IRF+FLCS-pattern.ptu'' and ''ATTO655_diff_FLCS-patter... hlighted in green. **Note:** The file ''Cy5_diff_IRF+FLCS-pattern.ptu'' contains a lifetime measuremen
- data_file_import @howto
- o:how_to_measure_the_instrument_response_function_irf|Instrument Response Function (IRF)]] and a decay curve of Coumarin6 dissolved in et... Original data file content }} Trace #0 shows the IRF, Trace #2 is the decay curve. The other data bloc... any more histograms. It is also possible that an IRF measurement and a decay measurement are stored in... wo histograms, both ''Anthracene_EtOH.phu'' and ''IRF375.phu'' contains only one histogram. These two m
- roi_fitting_using_the_flim_script @howto
- C window. * The new fitting parameters "Shift IRF" and "Bkgr IRF" (=background IRF) appear in the fitting parameter table. {{ roi_fi
- update @howto
- TCSPC window.\\ The new fitting parameters "Shift IRF" and "Bkgr IRF" (=background IRF) appear in the fitting parameter table.\\ **Note
- lifetime-fitting_using_the_rapid_reconvolution_algorithm @howto
- estimation of the instrument response function (=IRF) is shown. The IRF reconstruction is deducted from the rising edge o... unchecking them in the fit table, as well as the IRF background and IRF Fit. * One the single pixel level, the backgrou
- reconvolution_fit @howto
- an ''.etc'' container that contains at least one IRF histogram and at least one decay curve. Open the ... , we need to select and then assign a curve as an IRF and then change the fitting modality. {{ :howto:e... (selecting) ''crv[0]'', the first histogram, the IRF in this particular case, updates the plot. Now, a... the "Curve type" can be changed from "Decay" to "IRF". {{ :howto:et_fitwindow2.png |}} \\ \\ The p