position

Search

You can find the results of your search below.

Matching pagenames:

Fulltext results:

measuring_quantum_yield @howto
8 Hits, Last modified:
ple holder. * Put the sample holder into the IN-position. * Put the sample holder into the integrating s... 14-35-37.jpg?600 |}} * Select either IN or OUT position **Note:** The sample holder has two indexed positions. When in the IN position, the excitation beam will directly hit the sample, when in the OUT position the sample will only be illuminated indirectly (b
some_origins_of_multiexponetial_decays_for_single_dyes
2 Hits, Last modified:
place. Hence the system is always in its starting position $(A + X)$ prior to any excitation pulse.// //Cas... 1 state and brings the system to a more favorable position. Spectroscopically, this is manifested by the tim
fluorescence_correlation_spectroscopy-_a_short_introduction @general
1 Hits, Last modified:
uestion: \\ ** how far inside the sample can one position the focal volume and still get a reasonable FCS c
2ffcs @howto
1 Hits, Last modified:
the time trace oscilloscope optimize the pinhole position **with** Nomarski Prism and **both** lasers.
align_beam_backreflection @howto
1 Hits, Last modified:
ch quadrant. To reach this, you have to precisely position the beam to enter at the center of the objective
diamond_nv_centers @howto
1 Hits, Last modified:
w NV-centers (see figure 5), *select one, and position the focus on the NV-center. *use the oscillos
how_to_measure_the_instrument_response_function_irf @howto
1 Hits, Last modified:
or upon changes of the excitation wavelength, the position of the IRF can shift slightly, but this is accoun
how_to_work_with_the_instrument_response_function_irf @howto
1 Hits, Last modified:
power of the laser changes the shape and temporal position of the laser pulse. ((You can use the driver sett
intensity_time_trace_analysis @howto
1 Hits, Last modified:
return from the end of the line to the line start position is done with highest possible speed. In contrast,
select_the_correct_pinhole_size @howto
1 Hits, Last modified:
ger than the image of the [[wp>Airy Disc]] at the position of the pinhole: $$d_{Airy} = (1.22 * lambda / N.
using_the_antibunching_script @howto
1 Hits, Last modified:
lly moves the red and yellow curve to the correct position. Press "Calculate" again to recalculate the corre
symphotime64 @software
1 Hits, Last modified:
ng language ("STUPSLANG") even puts the user in a position to freely add new analysis procedures or customiz